Product features

• The flatness of the table shall be more than 0.1/1000mm; the squareness shall be more than 0.15/1000mm.
• Good surface finish of the table: 1.6 μ M
• Net lines specification: φ 28 Part NO. 100 * 100 ± 0.05mm; φ 16 Part NO. 50 * 50 ± 0.05mm
• Dimple Diameter & accuracy on the table: φ 28 1 ± 0.03mm, hole spacing: 100 ± 0.03mm; φ 16 1 ± 0.03mm, hole spacing: 50 ± 0.03mm;